alpha control Description
Control your heat pump and/or your ventilation unit with alpha control conveniently and free of charge from home via smartphone or tablet per app. Alpha innotec explains the various possibilities and helps you to make the right decision for an optimal indoor climate.
Your benefits:
- Convenient remote control
- Heat pump can be set and maintained directly via app
- Free and easy online download
The alpha control app enables the comfort control and monitoring of your alpha innotec heat pump with Luxtronic control 2.0/2.1 and/or your alpha innotec ventilation unit LG300 Eco. Heat pump and ventilation unit can be registered and operated independently of each other.
Function overview heat pump control:
- Displays the status of your heat pump on the start screen
- Displays the operating hours
- Displays all relevant temperatures
- Remote control of the most important functions
- Simple setting of the time switch functions
- Displays the data log
- Reading the error memory
- Setting the desired hot water temperature
In the home network, the above-mentioned functions are already enabled and fully usable in your heat pump. If you also have a heatpump24 account, all functions can also be used online, that means outside of the home network.
Function overview ventilation unit control:
- Switching the ventilation system on and off
- Selection of ventilation stages 1-4
- Selection mode: manual, automatic (with sensor), maximum and weekly program
- Information on the setting of the supply air volume flows in ventilation stages 1,2 and 3
After registering the ventilation unit using the serial number and your email address, the app can be used free of charge.
Condition:
You have a heat pump with the Luxtronic 2.0 or 2.1 controller and this is connected to your home network via network cable and/or a ventilation unit LG300 Eco.
New functions:
NEW! Compatibility to the ventilation unit LG300 Eco by integration of an extensive control in this app.
In the area of heat pump control an extensive bugfixing was done.
Your benefits:
- Convenient remote control
- Heat pump can be set and maintained directly via app
- Free and easy online download
The alpha control app enables the comfort control and monitoring of your alpha innotec heat pump with Luxtronic control 2.0/2.1 and/or your alpha innotec ventilation unit LG300 Eco. Heat pump and ventilation unit can be registered and operated independently of each other.
Function overview heat pump control:
- Displays the status of your heat pump on the start screen
- Displays the operating hours
- Displays all relevant temperatures
- Remote control of the most important functions
- Simple setting of the time switch functions
- Displays the data log
- Reading the error memory
- Setting the desired hot water temperature
In the home network, the above-mentioned functions are already enabled and fully usable in your heat pump. If you also have a heatpump24 account, all functions can also be used online, that means outside of the home network.
Function overview ventilation unit control:
- Switching the ventilation system on and off
- Selection of ventilation stages 1-4
- Selection mode: manual, automatic (with sensor), maximum and weekly program
- Information on the setting of the supply air volume flows in ventilation stages 1,2 and 3
After registering the ventilation unit using the serial number and your email address, the app can be used free of charge.
Condition:
You have a heat pump with the Luxtronic 2.0 or 2.1 controller and this is connected to your home network via network cable and/or a ventilation unit LG300 Eco.
New functions:
NEW! Compatibility to the ventilation unit LG300 Eco by integration of an extensive control in this app.
In the area of heat pump control an extensive bugfixing was done.
Open up
