BD Description
An alert will be issued if you move more than 10 meters away from a paired device.
[Device list] screen
A list of paired devices will be displayed.
Displays:
Indicator: The left indicator lights up when a paired device is connected.
Name: Displays the device name (device type) of the paired device.
Distance: Displays the distance to the paired device.
If the app starts, if it cannot be found, or if it cannot be measured,
It will be "Measuring".
In the case of "measurement", other screens cannot be used.
The color changes as shown below depending on the distance to the paired device.
Blue: Less than 5m
Orange: Less than 10m
Red: 10m or more
Correction: Tap the "Correction" button at the top right to display the [Correction] screen.
Paired devices: Tap each device line to display the [Map] screen.
*You can search for part of the "device name (device type)" in the search bar.
[Correction] Screen
Correct the distance to the paired device.
Displays:
Name: Displays the device name (device type).
Distance: Displays the distance to the device.
Correction slider: Slide left and right and use the following method to
Correct the distance to the paired device.
1. Stay 1 meter away from the paired device.
2. Slide the slider under the paired device name to the left or right.
Adjust so that it is approximately 1.0.
*You can search for part of the "device name (device type)" in the search bar.
[Map] screen
Your current location will be displayed.
Tap "Settings" in the upper right corner to display the [Settings] screen.
Displays:
1. Location where you want to control the presence or absence of an alert when the device is more than 10m away from the paired device
2. [List of devices] Location where the alert appeared on the screen
The method to specify 1. is as follows.
①Tap on the map.
②Enter the name of the place you tapped.
③ A pin will be displayed where you tapped.
2. How to remove
①Tap the pin.
②Instead of the name entered in 1., the name is [Device List].
For pins with the same device name,
Tap the displayed information.
③ If "Delete" is displayed, allow deletion.
④ The pin tapped in ① will be deleted.
[Settings] screen
[Map] Set whether to issue an alert at the location specified on the screen.
If no location is specified, nothing will be displayed.
[Map] If you tap the line of the specified location on the screen, a "warning" will appear.
It appears and disappears.
If "Warning" is displayed, an alert will be displayed.
*You can search for part of the "device name (device type)" in the search bar.
[How to stop the alert]
・When the alert MSG is displayed, tap OK,
Please select to stop the alert.
*Alerts will be displayed at regular intervals.
・[Map] Tap the device name pin from the screen,
Select Delete to delete the device name pin.
*Multiple device name pins will not be displayed.
If there is no problem with the device status,
Please delete the device name pin as soon as possible.
*Distance measurement takes time when the app starts.
*The more devices you have paired, the longer it will take to start the app.
*Depending on the usage environment and the performance and condition of each device, including the device running the app,
An error will occur when measuring the distance to a paired device.
*Due to communication for measuring distance, there may be times when the app's response is slow.
(When choosing between standby and end, it is okay to select standby.)
*Communication for distance measurement is performed at regular intervals.
*Distance measurement may be unstable for 3 to 5 minutes after starting the app due to the above reasons.
*Depending on the specifications of the paired device, some devices may not be able to measure distance.
(Measurement may occur when disconnected or connected.)
*The app price may be adjusted depending on the number of accesses to the map information.
*The app uses the foreground service function.
The following cannot be controlled by the app,
An event specific to Android devices may occur.
(Please see the bottom of the link.)
During development, it has been running normally for over an hour.
https://stackoverflow.com/questions/44425584/context-startforegroundservice-did-not-then-call-service-startforeground
[Device list] screen
A list of paired devices will be displayed.
Displays:
Indicator: The left indicator lights up when a paired device is connected.
Name: Displays the device name (device type) of the paired device.
Distance: Displays the distance to the paired device.
If the app starts, if it cannot be found, or if it cannot be measured,
It will be "Measuring".
In the case of "measurement", other screens cannot be used.
The color changes as shown below depending on the distance to the paired device.
Blue: Less than 5m
Orange: Less than 10m
Red: 10m or more
Correction: Tap the "Correction" button at the top right to display the [Correction] screen.
Paired devices: Tap each device line to display the [Map] screen.
*You can search for part of the "device name (device type)" in the search bar.
[Correction] Screen
Correct the distance to the paired device.
Displays:
Name: Displays the device name (device type).
Distance: Displays the distance to the device.
Correction slider: Slide left and right and use the following method to
Correct the distance to the paired device.
1. Stay 1 meter away from the paired device.
2. Slide the slider under the paired device name to the left or right.
Adjust so that it is approximately 1.0.
*You can search for part of the "device name (device type)" in the search bar.
[Map] screen
Your current location will be displayed.
Tap "Settings" in the upper right corner to display the [Settings] screen.
Displays:
1. Location where you want to control the presence or absence of an alert when the device is more than 10m away from the paired device
2. [List of devices] Location where the alert appeared on the screen
The method to specify 1. is as follows.
①Tap on the map.
②Enter the name of the place you tapped.
③ A pin will be displayed where you tapped.
2. How to remove
①Tap the pin.
②Instead of the name entered in 1., the name is [Device List].
For pins with the same device name,
Tap the displayed information.
③ If "Delete" is displayed, allow deletion.
④ The pin tapped in ① will be deleted.
[Settings] screen
[Map] Set whether to issue an alert at the location specified on the screen.
If no location is specified, nothing will be displayed.
[Map] If you tap the line of the specified location on the screen, a "warning" will appear.
It appears and disappears.
If "Warning" is displayed, an alert will be displayed.
*You can search for part of the "device name (device type)" in the search bar.
[How to stop the alert]
・When the alert MSG is displayed, tap OK,
Please select to stop the alert.
*Alerts will be displayed at regular intervals.
・[Map] Tap the device name pin from the screen,
Select Delete to delete the device name pin.
*Multiple device name pins will not be displayed.
If there is no problem with the device status,
Please delete the device name pin as soon as possible.
*Distance measurement takes time when the app starts.
*The more devices you have paired, the longer it will take to start the app.
*Depending on the usage environment and the performance and condition of each device, including the device running the app,
An error will occur when measuring the distance to a paired device.
*Due to communication for measuring distance, there may be times when the app's response is slow.
(When choosing between standby and end, it is okay to select standby.)
*Communication for distance measurement is performed at regular intervals.
*Distance measurement may be unstable for 3 to 5 minutes after starting the app due to the above reasons.
*Depending on the specifications of the paired device, some devices may not be able to measure distance.
(Measurement may occur when disconnected or connected.)
*The app price may be adjusted depending on the number of accesses to the map information.
*The app uses the foreground service function.
The following cannot be controlled by the app,
An event specific to Android devices may occur.
(Please see the bottom of the link.)
During development, it has been running normally for over an hour.
https://stackoverflow.com/questions/44425584/context-startforegroundservice-did-not-then-call-service-startforeground
Open up
