Чистка динамика Clear Speaker Description
Cleaning the speaker (Clear Speaker) of your phone and headphones from water will be necessary if your gadget briefly fell on the input and flooded the holes for the speakers. To clean the speaker from water, launch the application and press start. The whole procedure will take a little more than a minute.
You can also clean the speaker from dust or dirt. The principle of operation of Speaker Cleaner is the same, only a different ultrasound is used.
Removing water from the speakers is a necessary procedure after a mobile phone interacts with water. After all, water in the loudspeaker will worsen the sound of the device, and can also penetrate the board with microcircuits. Therefore, purging the speaker should be done as soon as possible after contact with water.
It is not difficult to remove water that has entered the speaker. Cleaning occurs automatically, just start the cleaner. At the same time, the dust and dirt cleaner works in the same way.
A clean speaker can be dried by pushing out dust by oscillating the diaphragm of the speaker. To clean the microphone, use our free application in Russian.
If you dropped your phone in water, then repairing the top speaker using the “drying” method should be done immediately. Cleaning is necessary.
By the way, cleaning the microphone from dust can be done for preventive purposes. For cleaning you don’t need anything except the phone itself and the application.
It is not at all difficult to remove or expel water from your phone. To remove liquid, you need to knock it out with sound waves of a special range.
Pumping out trapped moisture is a mandatory process for repairs. The water must be pushed out in a timely manner. Cleaning your speakers is important! Restore the normal sound of your device!
You can also clean the speaker from dust or dirt. The principle of operation of Speaker Cleaner is the same, only a different ultrasound is used.
Removing water from the speakers is a necessary procedure after a mobile phone interacts with water. After all, water in the loudspeaker will worsen the sound of the device, and can also penetrate the board with microcircuits. Therefore, purging the speaker should be done as soon as possible after contact with water.
It is not difficult to remove water that has entered the speaker. Cleaning occurs automatically, just start the cleaner. At the same time, the dust and dirt cleaner works in the same way.
A clean speaker can be dried by pushing out dust by oscillating the diaphragm of the speaker. To clean the microphone, use our free application in Russian.
If you dropped your phone in water, then repairing the top speaker using the “drying” method should be done immediately. Cleaning is necessary.
By the way, cleaning the microphone from dust can be done for preventive purposes. For cleaning you don’t need anything except the phone itself and the application.
It is not at all difficult to remove or expel water from your phone. To remove liquid, you need to knock it out with sound waves of a special range.
Pumping out trapped moisture is a mandatory process for repairs. The water must be pushed out in a timely manner. Cleaning your speakers is important! Restore the normal sound of your device!
Open up
