Here is our World Famous SpiriTune PMB In App form.
The SpiriTune PMB Is a Paranormal Music box tool which uses your devices EMF Sensor to trigger the Music Box if it reaches the threshold which you set within the App, Once triggered the Music will play and Add to the trigger counter so you can keep tabs on how many events occurred during your investigation.
New in version 1.2, Music selection menu added to choose various sounds.
EMF Sensor is required to use, So if you see no EMF Current reading you don't have the required sensor, However we will be adding More sensors in future Updates.
How to use!
Simply launch the App and place your device down flat in the area you wish to investigate, Take note of the Current EMF Value and proceed to set the threshold value to just above the current value, This is your trigger limit so if for any reason the EMF Readings spike beyond this threshold the Music will trigger and play for as long as the reading is above the threshold, Each time it is triggered the App will Add to the trigger count so you can keep notes of current events.
Notes: If your readings are too high you may need to calibrate the EMF Sensor, To do this rotate the device in a Figure of 8 Motion for a few seconds, This usually re aligns the sensor, If still high ensure any Device case or objects nearby do not contain Magnets, Do not place near speakers or other devices which may emit EMF Or magnetic energy.
The device will only trigger when there is a Disturbance in the EMF Readings, To avoid false positives, Do not hold the device whilst in use, Movement will cause spikes in the readings.
Currently the App is Beta, Proof of concept, We will Add finer adjustments later to allow a more precise threshold control, Currently the Flux measurements are in MicroTesla, And various sensors may be added in future builds.
The SpiriTune PMB Is a Paranormal Music box tool which uses your devices EMF Sensor to trigger the Music Box if it reaches the threshold which you set within the App, Once triggered the Music will play and Add to the trigger counter so you can keep tabs on how many events occurred during your investigation.
New in version 1.2, Music selection menu added to choose various sounds.
EMF Sensor is required to use, So if you see no EMF Current reading you don't have the required sensor, However we will be adding More sensors in future Updates.
How to use!
Simply launch the App and place your device down flat in the area you wish to investigate, Take note of the Current EMF Value and proceed to set the threshold value to just above the current value, This is your trigger limit so if for any reason the EMF Readings spike beyond this threshold the Music will trigger and play for as long as the reading is above the threshold, Each time it is triggered the App will Add to the trigger count so you can keep notes of current events.
Notes: If your readings are too high you may need to calibrate the EMF Sensor, To do this rotate the device in a Figure of 8 Motion for a few seconds, This usually re aligns the sensor, If still high ensure any Device case or objects nearby do not contain Magnets, Do not place near speakers or other devices which may emit EMF Or magnetic energy.
The device will only trigger when there is a Disturbance in the EMF Readings, To avoid false positives, Do not hold the device whilst in use, Movement will cause spikes in the readings.
Currently the App is Beta, Proof of concept, We will Add finer adjustments later to allow a more precise threshold control, Currently the Flux measurements are in MicroTesla, And various sensors may be added in future builds.
Open up
