Download USB Camera Pro APK for Android

USB Camera Pro Description

Using USB 3.0 HDMI capture card : https://youtu.be/WkmuyfwKVrs
Using UVC H.264 device : https://youtu.be/j-71QMNuDr0
Connect multiple devices : https://youtu.be/2znw4eVazDs
RTSP real time stream : https://youtu.be/-Qzc0RSDerg
RTMP live streaming : https://youtu.be/S5Bc1r57CUU
Picture In Picture : https://youtu.be/Mbturdxyi5c
VR/FPV View : https://youtu.be/zEqBXLNFnE0
Display Video On Lock Screen : https://youtu.be/Hdf2H_YusO

Tip:
Supports following devices:
1) UVC WebCam with microphone or external USB Audio input (Supports H.264, H.265, HEVC, MJPG, YUY2, P010, NV12 and so on)
2) UVC video grabber with audio input or external USB Audio input (Up to 4K via HDMI, Supports H.264, H.265, HEVC, MJPG, YUY2, P010, NV12 and so on, Supports progressive and interlaced video)
3) EasyCap including audio with UTV007 / HTV600 / HTV800 chipsets (VID_1B71&PID_3002)
4) EasyCap including audio with STK1160 + SAA7113/GM7113 + AC97 chipsets (Audio 48kHz stereo version VID_05E1&PID_0408)
5) EasyCap including audio with STK1160 + SAA7113/GM7113 (Audio 8kHz mono version VID_05E1&PID_0408)
6) EasyCap including audio with EM2860 + SAA7113/GM7113 + AC97 chipsets (VID_EB1A&PID_2861)
7) EasyCap including audio with SMI2021 + SAA7113/GM7113 + ES7240/CS5340 chipsets (VID_1C88&PID_0007, PID_003C, PID_003D, PID_003E, PID_003F, PID_1001)

Please click USB icon from toolbar to open Device dialog to open device if the system unable to detect your device.
Please use a good quality OTG cable and ensure power supply. Some devices may need to bridge HUB to enhanced USB signals to work properly, e.g. Elgato Cam link, ezcap Video Grabber.
Using HEVC for video recording/streaming requires Android 5.0 or above, and the device must supports HEVC codec.
Using AV1 for video streaming requires Android 10 or above, and the device must supports AV1 codec.

"USB Camera" can let your android device connect to USB WebCam or video capture card via USB-OTG. You can record video or capture snapshot, OR turn your phone into a wireless IP Camera via build-in RTSP and HTTP Server for security monitoring WITH Bi-directional audio support, you can use your browser to view, of course, include "IP Camera" App.

"USB Camera" can mix USB Audio with a built-in microphone and output.

"USB Camera" can push the video and audio to RTMP/SRT live media server and use for network live broadcast. It supports the rtmps security protocol and SRT protocol and it can also push the media to multiple media server at the same time. It also supports HEVC/AV1 over RTMP and can be used for YouTube Live currently.

"USB Camera" supports Side by Side(SBS) view and it can work with FPV goggle

"USB Camera" can add timestamp, GPS, speed and other info on the video frames while recording and can use your headset or Bluetooth headset to capture snapshot and record video. It also supports WebCam's snapshot button.

"USB Camera" supports loop-recording. Can set auto-segment when recording and auto-delete old video archives when no enough storage. "USB Camera" can be used as "Dash Cam"

USB Camera can seamless switching between foreground and background. Just press 'Enter background' from menu. The recording will not interrupted during switching!

It support auto video recording which based on Motion Detection and the video record can be uploaded to FTP server automatically and notify you via Email!

Bi-directional audio requires IP Camera App, you can get it from https://play.google.com/store/apps/details?id=com.shenyaocn.android.WebCamPro

IMPORTANT! On Android 9 and above, Camera permission is required to get fully USB Video device access. Don't worry, the application does not contain any function/code to visit built-in camera because it is unnecessary.

This is userspace driver so it used for the app only. Android does not allow to install kernel driver so it unable to use for third-party apps.

Open up

Comments about USB Camera Pro Android Version

I am using this on two Samsung phones and the app is different on each. When I installed it on the second one I had the added settings of Display Audio indicator and Display FPS, etc. I uninstalled the app on the first phone and tried again but no difference. Could it be I have residual from the trial version which I removed as well? This is what I was looking for to monitor a couple of PTZ cameras and record them. I would give it a 5 if I had the level and FPS indicators on my first phone.

I want to this this app 5 stars. It does work, but what I can't get right is the settings. I am using a tablet in my car and have a video capture device like easycap. I have it setup to turn on when my car goes in reverse. It works great as long as I have the app open. I want it to open when I put the car into reverse and go away when I take the car or if reverse. Recommendations for the software settings? I have tried the options in General settings, such as start service when connected or start service when start up and disconnect when signal lost. Nothing works.

I have had the Pro version for several years with no problems. (I don't use it a lot, but it has always worked well when I needed it. ) For the first time, I tried to add an overlay image to use while streaming. It doesn't work. The app crashes as soon as you start streaming. And received a message from Android telling me the app has a bug and to clear the cache. Didn't work. Tried using a smaller bug but still crashes. Works fine once you turn off the overlay. Using an S21 Ultra

USB Camera Pro APK FAQ

Is USB Camera Pro safe for my device?

Open up

Yes, USB Camera Pro follows the Google Play content guidelines to ensure safe use on your Android device.

What is an XAPK file, and what should I do if the USB Camera Pro I downloaded is an XAPK file?

Open up

A file with .xapk extension is a compressed package file. It is a container file format that incorporates APK and additional associated files required for the installation. The XAPK format was introduced to package the APK file and OBB file together for a seamless delivery and installation process. XAPK format can help reduce the package size of application. On mobile phones, users need to install the XAPK installer first, and then install XAPK files through that installer. You can find the installer here:https://apkcombo.com/how-to-install/. But on PC client, you just need to put the file on LDPlayer.

Can I play USB Camera Pro on my computer?

Open up

Yes, you can play USB Camera Pro on your computer by installing LDPlayer, an Android emulator. After installing LDPlayer, simply drag and drop the downloaded APK file into the emulator to start playing USB Camera Pro on PC. Alternatively, you can open the emulator, search for the game or app you want to play, and install it from there.

USB Camera Pro

Download USB Camera Pro APK

USB Camera Pro Description

Comments about USB Camera Pro Android Version

USB Camera Pro APK FAQ

Is USB Camera Pro safe for my device?

What is an XAPK file, and what should I do if the USB Camera Pro I downloaded is an XAPK file?

Can I play USB Camera Pro on my computer?

Search Recommendation

Program Available in Other Languages